Modify Selection
- Products and materials:
- Dusts
- or
- Coal dust
- or
- Silica dust
- or
- Limestone dust
- or
- Float dust
- or
- Asbestos dust
- Document types:
- Peer reviewed journal articles
Home Links
Results 51 - 60 of 61
-
1/1/2006 - Peer reviewed journal articlesSince 1982, standard calibration materials recommended for respirable crystalline silica analysis by the Mine Safety and Health Administration (MSHA) P7 Infrared Method and the NIOSH X-ray Diffraction (XRD) Analytical Method 7500 have undergone minor ch...
-
2/1/2002 - Peer reviewed journal articlesThis article summarized results of research conducted by the National Institute for Occupational Safety and Health (NIOSH) at its Pittsburgh Research Laboratory. The objective of this work was to determine the correlation between the mass (M) of respir...
-
9/1/2001 - Peer reviewed journal articlesThe objectives of this work are to 1) evaluate the performance of the P7 method on field samples of low quartz mass loadings, 2) evaluate the magnitude of dust mass spatial variability within an enclosed cab environment, and 3) estimate the subsequent p...
-
6/1/2001 - Peer reviewed journal articlesThis paper describes laboratory experiments in a wind tunnel with a roll crusher to identify relationships among crushing parameters, product size, coal rank properties and airborne dust generation.
-
11/1/2000 - Peer reviewed journal articlesHealth research studies have identified that the risk of developing and the severity of CWP are directly related to the amount of respirable dust exposure and the coal rank. The Pittsburgh Research Laboratory is pursuing more in-depth studies of coal ch...
-
5/1/2000 - Peer reviewed journal articlesExplosion characteristics such as the minimum explosible concentration and the rock dust inerting requirements were measured for various combustible dusts. The explosion resistance characteristics of seals was also evaluated.
-
5/1/2000 - Peer reviewed journal articlesTwo types of flammability limits have been measured for various dusts in the Fike 1-m3 (1000-L) chamber and in the Pittsburgh Research Laboratory (PRL) 20-L chamber.
-
5/1/2000 - Peer reviewed journal articlesProvides information on the explosibility and ignitability properties of dust clouds that can be used to improve safety in industries that generate, process, use, or transport combustible dusts.
-
4/1/2000 - Peer reviewed journal articlesA recent report evaluating silica exposure levels in the metal/nonmetal mining industry noted that bag packaging and loading are some of the occupations at the greatest risk.
-
9/1/1999 - Peer reviewed journal articlesAirborne respirable dust surveys were conducted at six surface coal mines to investigate the effectiveness of dust control methods used on rotary rock drills and bulldozers.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program